favorite
favorite
hide
unhide
flag

Posted

print

Mustang II Disc Brake Rotors, 5 on 4.5 Inch, Brand New - $40 (Granger)

Mustang II Disc Brake Rotors, 5 on 4.5 Inch, Brand New 1 thumbnailMustang II Disc Brake Rotors, 5 on 4.5 Inch, Brand New 2 thumbnailMustang II Disc Brake Rotors, 5 on 4.5 Inch, Brand New 3 thumbnailMustang II Disc Brake Rotors, 5 on 4.5 Inch, Brand New 4 thumbnailMustang II Disc Brake Rotors, 5 on 4.5 Inch, Brand New 5 thumbnailMustang II Disc Brake Rotors, 5 on 4.5 Inch, Brand New 6 thumbnailMustang II Disc Brake Rotors, 5 on 4.5 Inch, Brand New 7 thumbnailMustang II Disc Brake Rotors, 5 on 4.5 Inch, Brand New 8 thumbnail
Two brake rotors from Speedway Motors, Part Number 910-31001. Brand new. Purchased these for a 1940 Chevrolet Pickup Street Rod with a Mustang II front suspension, but they were the wrong bolt pattern. Needed the 5 on 4.75 Inch.

From Speedway Motors Web Site:
Vented stock 9-1/4" diameter brake rotors for 1974-1980 Mustang II, Pinto, or Bobcat spindles (or Speedway brake kits using '49-'54 Chevy spindles). These five lug conversion brake rotors are new, not plugged or re-drilled. Has a 5 on 4-1/2" bolt pattern with corresponding 1/2" diameter fine thread wheel studs.

Outside Diameter of rotor disc - 9.256"
Thickness of vented disc - .884"
I.D. of back side of rotor - 6.256"
Rear rotor face to bearing hub - .290"
Outer hub diameter where wheel will mount - 5.834"
Outer hub height - 1.450"
Bearing snout is 1.60" tall, 2.55" diameter at bottom and 2.384" at outer
end.

Rotors are located at my home. It's a Granger address, but it is just outside of Walburg, about 7 miles from IH-35.

post id: 7755205535

posted:

best of [?]

loading
reading
writing
saving
searching